Bluebird Wanderlodge air dryer cartridge replacement

In the bluebox resides an instruction manual on rebuilding the Bendix AD2 Air Dryer ◄ Back Next ► Picture 1 of 19
Restoring, building and racing all kinds of cars, boats and airplanes
In the bluebox resides an instruction manual on rebuilding the Bendix AD2 Air Dryer ◄ Back Next ► Picture 1 of 19
kspordelete ◄ Back Next ► Picture 1 of 24
3M rubbing compound – $75 per bottle ◄ Back Next ► Picture 1 of 19
I wet sand the third coat of urethane primer to get it very smooth and fair ◄ Back Next ► Picture 1 of 11
I use fiberglass filler to get out the shape of the nose ◄ Back Next ► Picture 1 of 13
The aerodynamics of the Volvo XC are significantly improved by the addition of some Stohr bodywork ◄ Back Next ► Picture 1 of 18
Need to drill a couple of holes to get them to fit 😉 ◄ Back Next ► Picture 1 of 15
Dick Boggs got pushed into a wall at Pacific Raceways last weekend and crunched the corners of his Stohr sports racer. I'm going to repair his fenders and make new molds. ◄ Back Next ► Picture 1 of 33
[Show as slideshow] 1 2 … 4 ►
I sanded down the runs and re-sprayed the affected areas ◄ Back Next ► Picture 1 of 5
It's 50 degrees in the garage, the paint was wamred to 70 degrees in the house, still tough to get it thin enough to flow – but thick enough to cover ◄ Back Next ► Picture 1 of 7
I cut the brake duct openings to their final size and contour the opening into the ducts ◄ Back Next ► Picture 1 of 8
Sanding the fiberglass filler ◄ Back Next ► Picture 1 of 13
Cutting and laying out more 6 oz. e-glass for the corners and inside the body ◄ Back Next ► Picture 1 of 16
I make a mirror image of the lexan template to make a flat plate for the front of the car. ◄ Back Next ► Picture 1 of 26